ScreenLogic2 Wireless Link Troublemaker

[KDpoolguy]

Tom,
Can I use that same 22 gauge wire going to the indoor controller to also power/control the protocol adapter?
I’m now thinking if I can do that, I can just run the CAT5 network cable around the room to the adapter, or use a Powerline (which I already have one lying around) to get the network cable more neatly to that location.

 

[ogdento]

Yeah that 22 gauge wire should work fine... you can splice right into the connector at the indoor controller. And I think the powerline adapters are a good idea too although I haven't tried them (there's not all that much data going back and forth).