Salt cell codeI

[Vanhalen5150]

Every time my Jandy salt cell reaches 4.0 I get the following codes 125/194. When it stays below 4.0 I don’t get any codes. Is the high limit number of 4.0 that it sets off these codes? I manually read the salt levels and it seems to be about 20-30 digits off between the readout on the digital readout compared to my hand held meter. Is there anyway to calibrate the salt cell readout?

 

[chlorinatorpro]

Just type 'Jandy 125/194' (and press ENTER) into the TFP search bar above . You will see numerous threads. More than likely you will need to clean your salt cell.

 

[Vanhalen5150]

Just type 'Jandy 125/194' (and press ENTER) into the TFP search bar above . You will see numerous threads. More than likely you will need to clean your salt cell.

It’s a brand new salt cell. My pool was not producing chlorine before I got the new cell and it’s working beautifully said my pool guy. Weird! I just lower the number when it hits 4.0