I just got my M600. I have a cya of 80 so I need to be 9-11 bleach ppm. That too much for the robot to handle?
Robot cleaning and chlorine level
- Thread starter Thormus
- Start date
- Jun 22, 2014
- 47,885
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
The amount of stabilizer (CYA of 80) is proportionate to the elevated FC level, so you are fine. Even if you were performing a SLAM at a very high FC level, the robot should fine, although in that case I might rinse it off afterwards with fresh water just for peace of mind.
rowiac
0
- Apr 20, 2018
- 82
- Pool Size
- 26000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Core-55
The spec from Maytronics is a maximum chlorine level of 4ppm, but that does not take into account CYA level. I assume that if it's safe to swim in the pool, it's safe to run the robot in it.
