Recently had my pool resurfaced and I’m concerned that the scuff marks and large discolored areas do not appear to be evening out over time. I’m looking for input from more experienced on how far off the norm it is, and what can be done to correct.
Here’s some background / time line:
In the pics, notice the dark streak on the right side of skimmer mouth. There are larger dark splotches like this in the shallow end near the stairs too, although you might have a hard time distinguishing from shadows in the other pic. Deep-end pic shows the white scuffs which are everywhere.
The contractor will be back in another 1-2 weeks to convert to salt and I would like to be prepared to have an intelligent conversation with him. Input would be appreciated!
Video: http://youtu.be/x7bGWYwtu8c
Here’s some background / time line:
- 2/23 – Pool resurfaced with marbletite (quartz/agg similar to diamondbright). Pool fill begins
- 2/25 – Pool fill is complete (~48hrs)
- 3/2 – Contractor hooks-up pump, adds chems, performs 1st brushing (this delay made me nervous but contractor assured everything was fine)
- 3/3 and onward daily to present – I’m brushing and maintaining chem levels specified by contractor (Ph 7-7.2 & Cl 2-3)
In the pics, notice the dark streak on the right side of skimmer mouth. There are larger dark splotches like this in the shallow end near the stairs too, although you might have a hard time distinguishing from shadows in the other pic. Deep-end pic shows the white scuffs which are everywhere.
The contractor will be back in another 1-2 weeks to convert to salt and I would like to be prepared to have an intelligent conversation with him. Input would be appreciated!
Video: http://youtu.be/x7bGWYwtu8c
Last edited: