Hi - my replaster will be tomorrow with StoneScapes mini-pebble and I just checked my fill water readings with the TF100 kit.
FC 1.0
CC 0
PH 8.0
CH 100
TA 120
CYA 0
NPT web site says to adjust TA to 80 first with muriatic acid on day 1 and then adjust PH between 7.2 and 7.6 with muriatic acid as well in days 1-2. Then adjust CH to a minimum of 150 with CaCl on day 3. On day 4 and beyond, adjust FC to 1.5 to 3.0 and CYA to 30-50. I'm not sure how much help my pool remodeler will be in the water balancing, so I though I would ask for suggestions here.
How does my fill water look? Any major concerns? And does NPT give the right startup procedure? Where is the best place to get muriatic acid, CaCl, CYA. I plan to get liquid chlorine and muriatic acid from Home Depot. Thank you.
FC 1.0
CC 0
PH 8.0
CH 100
TA 120
CYA 0
NPT web site says to adjust TA to 80 first with muriatic acid on day 1 and then adjust PH between 7.2 and 7.6 with muriatic acid as well in days 1-2. Then adjust CH to a minimum of 150 with CaCl on day 3. On day 4 and beyond, adjust FC to 1.5 to 3.0 and CYA to 30-50. I'm not sure how much help my pool remodeler will be in the water balancing, so I though I would ask for suggestions here.
How does my fill water look? Any major concerns? And does NPT give the right startup procedure? Where is the best place to get muriatic acid, CaCl, CYA. I plan to get liquid chlorine and muriatic acid from Home Depot. Thank you.