I searched for answers but I’ve haven’t found any hence this post. My tabs aren’t dissolving/melting. Here are the steps I’ve taken/confirmed so far:
- Backwashed filter
- confirmed water is flowing into the canister by removing the lid and watching the water flow, solid flow
- removed screen from bottom of canister and ensured it wasn’t clogged
- removed entire chlorinator and inspected small o-ring, re-lubed
- inspected inner check valve, the ball bearings is moving and rattling freely
- if I fill the canister with water, turn off the pump, remove the lid, the water quickly drains from the canister