Purchasing Variable Speed Pump

[pars]

Hi mas985,
I checked the electric sockets and it looks like the pump socket has two 110s tied together as illustrated by kiss4afrog in the picture above.

 

[Kiss4aFrog]

Then you sir (pars) are running 220 volt !! Usually the 120 is cheaper and a bit easier for the average home owner to figure out but the 220 to my way of thinking is better.
Most pool and spa motors can be wired either way and that's where you have to pay attention. The motor should have a sticker on it with wiring directions on how to hook it up for 120 or 220. The next step would be wiring a switch for a two speed pump. Most people put it right on the motor itself.

 

[mas985]

You are going to need a B975 motor and a new seal kit.

 

[pars]

Thanks a lot for all your help and instructions.

 

[patrick3229]

If you want the 2 speed motor with an integrated digital control mounted right on the motor than you would require a B2975T and the seal kit is GOKIT66


Sent from my iPhone using Tapatalk