Problem with Jandy Aqualink Lights on Auto

[joelans]

I have a new pool with Jandy Aqualink PDA (can control the pool features with the phone). Putting aside that the Web interface for Jandy is from 1970, I'm having a problem with the "Dusk Set Up" feature. In sum, I have the pool lights turn on at Dusk. But, what happens is that the separate spa light turns on with this feature as well. Then, the pool lights turn off per its program in the "Dusk Set Up," but the spa light stays on, and I always have to turn it off manually.

I've checked a number of times, and the only thing that is selected to turn on at Dusk is the pool lights - the spa lights are not selected at all.

I've tried disabling this schedule, rebooting the Jandy controller, etc., but (after being re-enabled) the spa lights still always turn on with the pool lights at Dusk, but the spa lights then don't turn off.

Any suggestions?

Thanks.

 

[PoolGate]

You have a seperate button for the pool lights and the spa lights? When you go down the entire list of devices (press "Page Down"), are you sure ONLY the pool light is on? Can you post the below pics?

Do they come on at the exact time the pool lights come on? Can you show a print screen showing the buttons?

What does your regular schedule look like?

 

[joelans]

Attached are the screenshots - my pool and spa lights are separate (each can be turned on/off separately). With the Dusk Schedule, both the pool and spa lights turn on at exactly the same time. Then at 10:00 pm (per the Dusk schedule) the pool lights turn off, but the spa lights remain on (until I have to turn them off manually - usually the next day).

 

[PoolGate]

What does your regular schedule look like? Also try scheduling the spa lights to go on and see if the same thing happens with the pool lights.

 

[joelans]

The regular schedule only has the pool filter pump scheduled, and that works fine. I will try it with just activating the spa light, and see if the pool lights turn on as well.