Prepping for New 24L x12W x 52Deep Pool

[jonnyci]

Hi
New to the forum. I am getting ready to level my ground for my 24x12x52 pool and was curious if anyone could give me the support pole to support pole dimensions. I want to make sure I am prepping a large enough area.

Thanks!!
Jon

 

[Rushey]

You looking at 25' 10" x 13' 10" to the outer edges of the support legs but then you might want to add another 6" each side if you are putting down pavers so the leg will be in the middle. So at least 26' 10" X 14' 10"

 

[jonnyci]

That's what I was looking for Rushey. can I ask what you used for your base?
Thanks for the info!!

 

[Rushey]

I had very hard ground so put 2" pavers 16"x16" to support the legs and 2" of sand covering everything else. This image was very helpful for laying out the pavers but would have been easier if the measurements were to the outside edge of the pavers

 

[jonnyci]

thanks again Rushey