Recently I’ve noticed that the returns in my pool seem to have a constant bit of air bubbles coming from them. I’ve tried cleaning the filter and running the pump on high to get rid of them but it doesn’t seem to work. I have a super pump vs 700 and a Hayward xtreme cartridge filter. Please let me know if you have any suggestions.
Pool Returns bubbling
- Thread starter mke11
- Start date
- Jun 24, 2021
- 16,689
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Bill1974
Well-known member
- Jun 18, 2014
- 681
- Pool Size
- 32000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Either the SWG or the pump cover is not sealing perfectly. With the pump on high it would be difficult to see bubbles from the SWG.
Are there any valve on the suction side that are close or partially closed that should not be? Any blockage of a skimmer line? Water level low? skimmer/Weir doors not freely moving?
Are there any valve on the suction side that are close or partially closed that should not be? Any blockage of a skimmer line? Water level low? skimmer/Weir doors not freely moving?