Pool guy closed and left pump on.

[HoodieG]

Hey guys,

My pool guy closed the pool but didn't shut off power to the timer, so the pump went on shortly after he left. It ran dry with the lines blocked for 6-8 hours. The sand filter was set to winter mode. What kind of damage should I expect/inspect for?

It's a 1.5 hp pump, inground pool, sand filter.

Thanks!

 

[wireform]

There's probably not much you can see without water. Let the guy know come spring there may be a reair due to the fact.

 

[Bperry]

Hey guys,

My pool guy closed the pool but didn't shut off power to the timer, so the pump went on shortly after he left. It ran dry with the lines blocked for 6-8 hours. The sand filter was set to winter mode. What kind of damage should I expect/inspect for?

It's a 1.5 hp pump, inground pool, sand filter.

Thanks!

maybe some overheated seals/bearings if there’s was no water in the lines, maybe burst seals if there was some water.

 

[JamesW]

If the drain plugs were removed, the seal is probably the only damage.

Take it apart and show the seal and seal plate.

 

[mnmomma67]

Hey guys,

My pool guy closed the pool but didn't shut off power to the timer, so the pump went on shortly after he left. It ran dry with the lines blocked for 6-8 hours. The sand filter was set to winter mode. What kind of damage should I expect/inspect for?

It's a 1.5 hp pump, inground pool, sand filter.

Thanks!

I would definitely call them and tell them what happened !