Polaris QT Blower Replacement Top

[ajw22]

I have a Polaris QT Blower Model 1-460-02 1 HP 240V providing bubbles to my spa (pics below). The rubber cover is cracked. I tried some duct tape on it as a temporary fix. I found the manual and parts diagram online and the blower top is listed as part 1-400-10. However all web searches find the part unavailable and listed as obsolete.

I do find some new 460-02 blowers available for around $215 but that is expensive to just scavenge the cover. http://poolandspapartsdepot.com/polaris-air-blower-1-460-02/ It is not clear to me if Zodiac (Polaris) makes this model anymore or if there is just stock still on shelves.

I see Jandy has what looks like an equivalent 1 HP 240 V Blower PSB210 for around $150. https://www.poolzoom.com/pro-series-blower-1-0hp-240v.html

Anyone know what is the best direction to go?

1. Can I find a replacement top?
2. Buy a 460-02 and scavenge the top and save the rest for parts if other things fail or replace the entire unit?
3. Replace it with a Jandy PSB210?

Thanks for all advice.

 

[blakeusa]

Here is one on ebay for $100.
ZODIAC POLARIS 1-480-02 2HP 240V SPA QT SERIES BLOWER | eBay

I would just use some black silicone seal and call it good enough. You could pop the top off and put silicone on the inside, as well as push the top back flush.

Then just seal the top.

Too bad as I have thrown two of these away that had bad motors.

 

[blakeusa]

I just replaced my blower and have a top for you. Send me a note and its yours.

B