polaris plus error 94

[westwood]

i have a polaris plus salt system and is giving me a error 94 i replaced the cell for a new one a replaced the fuce housing and fuce and the salt is 3200 anyone can help me
i have a new board and transformer But before changing
someone has an idea please help
my y mail is [email protected] jose thanks

 

[JasonLion]

Welcome to TFP!

Error 94 can be a burned out fuse, loose cell cord connection, cut cell cord, or corroded cell cord terminals.

 

[westwood]

i replaced the cell for a new one and fuce is new and fuse housing
new cell new fuse new fuse housing

 

[Poolschoolgrad]

Jose

This may be a long shot, but check the temperature setting to be sure it is accurate for the water temperature.
This may sometimes cause an error 94.

PSG

 

[westwood]

how I can check the temperature of the water
when it starts the cycle works well for 3 minutes
but after entering the code 94

 

[Poolschoolgrad]

Cycle the power to restart
Press the menu button
Press the up arrow
Temperature should be flashing
Increase the set temperature to match the real temperature of the water
Wait about 3 or 4 minutes to verify that the error 94 does no return.

Hope this works

PSG

 

[westwood]

i restart the cicle change the water temp to 95 and 94 error returns someone has a good idea

 

[westwood]

any idea

 

[westwood]

POLARIS PLUS ERROR 94

i have a polaris plus salt system and is giving me a error 94 i replaced the cell for a new one a replaced the fuce housing and fuce and the salt is 3200 anyone can help me
i have a new board and transformer But before changing
someone has an idea please help
my y mail is [email protected] jose thanks
i ree start the cicle and ree set temp to 95
and code 94 apears
in has a new cell