Playing with new 3D printer-remixing organizer for TF-Pro!

[midmodonhillwood]

Good morning from rainy Northern California! I have the TF-PRO Test Kit and have added one more beaker for a total of 3 and 3 X-shaped magnetic stirrers.

I got a new 3D Printer and have decided to make a replacement organizer to replace the foam one with cut-outs!

The only thing is, I'm all out of the R-0013 2oz Reagent bottles that come with the kit/refill kit and would like an exact measurement! If anyone has a caliper to measure the diameter of one, that would be awesome! I was guessing it may be the same size as the 2 oz R-0871 FAS/DPD Reagent bottle which with clearance I have made 39mm.

Right now, I'm just printing a 4mm tall slice to see how everything fits and if it will fit in the case!

Thank you!

 

[Turbo1Ton]

I measured 1.525" (38.735mm) for the R-0013 bottle and it did not seem to be a perfect cylinder, as one direction passed through the calipers with a slight drag, rotated the bottle and it passed through smoothly with no drag.

The bottle looks to be ever so slightly larger than the R-0871 bottle, but very very close.

--Jeff

 

[midmodonhillwood]

I measured 1.525" (38.735mm) for the R-0013 bottle and it did not seem to be a perfect cylinder, as one direction passed through the calipers with a slight drag, rotated the bottle and it passed through smoothly with no drag.

The bottle looks to be ever so slightly larger than the R-0871 bottle, but very very close.

--Jeff

I just saw your reply this morning, thanks Jeff!