I was having trouble with my motor, and kept trying to repair it. While trying to repair the motor, I believe I stepped on the flow switch cable and pulled the wires out of the telephone jack connection.
I bought a new phone jack connector and tried to replace the original one. When I plugged it in there was a constant red light that read, No Flow. I was not certain if the new connector that I had installed was working.
Since I was not absolutely certain that the phone jack connector was working, I bought a regular phone line. I spliced the factory installed phone jack connection on to the flow switch wire. Same thing red light reading, no flow.
I tried to recalibrate the Mineral Springs, go from auto to off, back to auto, etc. I never heard the mineral springs make the click noise to tell you it is now ready to be calibrated.
The phone jack connection I believe must be working because when I disconnect it the lights go out.
What could cause the Mineral Springs not to make that clicking noise, when you go from auto to off, and back to auto. Could it be that the flow switch and the phone jack connection is not working?
I bought a new phone jack connector and tried to replace the original one. When I plugged it in there was a constant red light that read, No Flow. I was not certain if the new connector that I had installed was working.
Since I was not absolutely certain that the phone jack connector was working, I bought a regular phone line. I spliced the factory installed phone jack connection on to the flow switch wire. Same thing red light reading, no flow.
I tried to recalibrate the Mineral Springs, go from auto to off, back to auto, etc. I never heard the mineral springs make the click noise to tell you it is now ready to be calibrated.
The phone jack connection I believe must be working because when I disconnect it the lights go out.
What could cause the Mineral Springs not to make that clicking noise, when you go from auto to off, and back to auto. Could it be that the flow switch and the phone jack connection is not working?