3 years old, runs fine but just won’t quite get hot enough.
No errors but display says “313”
Changed the thermistor on the top left of the inlet....$80 from the pool store...$20 at Amazon
No change. Same display of “313” and no errors...and still heats but doesn’t max to 104.
Up/down buttons on heater don’t change anything...stays at 313.
My phone app says set to 104 but quits in upper 90’s.
Change the board?
Fill the pool with dirt?
The part I changed:
Tom
No errors but display says “313”
Changed the thermistor on the top left of the inlet....$80 from the pool store...$20 at Amazon
No change. Same display of “313” and no errors...and still heats but doesn’t max to 104.
Up/down buttons on heater don’t change anything...stays at 313.
My phone app says set to 104 but quits in upper 90’s.
Change the board?
Fill the pool with dirt?
The part I changed:
Tom
You posted your question over 3 weeks ago and no one has replied. Heaters are not in my area, but others may know if you still need help. We can ping them specifically if needed. Hope you have a good day. 