Pentair diverter valves

May 29, 2018
64
Chicago, IL
I am looking to buy repair kits for my two Pentair diverter valves because both are leaking. One is a three-way valve and one is a two-way valve. But as you can see their different sizes. Can somebody please let me know the part numbers to the repair kits for these? I have been searching online but cannot seem to find specs to figure out what sizes I need.
 

Attachments

  • 1085E77E-419D-4CFB-A606-2000DCAADDD6.jpeg
    1085E77E-419D-4CFB-A606-2000DCAADDD6.jpeg
    435.9 KB · Views: 19
  • 7C9F5CFF-74AA-4853-8DA9-5A85C7AA9FD9.jpeg
    7C9F5CFF-74AA-4853-8DA9-5A85C7AA9FD9.jpeg
    279.2 KB · Views: 20
  • 5BA4EFB6-1A7C-4407-91B1-EC0D78FB1A40.jpeg
    5BA4EFB6-1A7C-4407-91B1-EC0D78FB1A40.jpeg
    397.1 KB · Views: 20
  • FCB49D44-BE2E-4138-9575-34726A9E90EC.jpeg
    FCB49D44-BE2E-4138-9575-34726A9E90EC.jpeg
    283.9 KB · Views: 22
Are you sure the whole diverter valve needs to be replaced? Where exactly is it leaking from? There are o-rings inside that may be the culprit -maybe start with looking at those? I had a similar issue but my pool guy at the time was able to address it with new o- rings.
 
Do you have 2inch plumbing? If so I’m thinking picture 2 is a pentair 1.5x2 in valve - so your 2-in plumbing fits over the outside of the fittings (with a coupler). And picture 4 is a 2x2.5 valve- so your plumbing fits inside the fittings.

Here’s a part list:

The only different one it looks like is #9. The bigger valve would use part 270056 and the smaller one would use 270075.
 
Last edited:
  • Like
Reactions: littlebuddy12
Do you have 2inch plumbing? If so I’m thinking picture 2 is a pentair 1.5x2 in valve - so your 2-in plumbing fits over the outside of the fittings (with a coupler). And picture 4 is a 2x2.5 valve- so your plumbing fits inside the fittings.

Here’s a part list:

The only different one it looks like is #9. The bigger valve would use part 270056 and the smaller one would use 270075.
Thank you for your reply.... when taking a closer look at the pictures.... I noticed that the 2 way valve is smaller... making it the 1 1/2-2 " valve... not the 2-2 1/2" valve... it sucks.. because the smaller diverter replacement is much more $$ than the larger one... 270075 appears to be the winner... now I just have to bite the bullet and order it.
 
Do you have 2inch plumbing? If so I’m thinking picture 2 is a pentair 1.5x2 in valve - so your 2-in plumbing fits over the outside of the fittings (with a coupler). And picture 4 is a 2x2.5 valve- so your plumbing fits inside the fittings.

Here’s a part list:

The only different one it looks like is #9. The bigger valve would use part 270056 and the smaller one would use 270075.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.