Hi all, we live in CT and have an old (20-25 years) in-ground, gunite pool that needs repair. Lots of loose tiles, quite a few stains on bottom of pool (some spots where you can see the underlying gunite). So we are looking to do a full renovation. It is about 30,000 gallon pool with attached hot tub. Anyhow, one contractor recommended going the Eco Finish route. Some brief reading leads me to believer there are issues with this? Would you all recommend we go with re-plaster? Thanks for you help.
Old Gunite Pool Needs Renovation
- Thread starter jjfinnegan22
- Start date
- Jun 22, 2014
- 47,873
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
It's good you started a new thread (below) about your renovation process so all the comments can stay together. Lots of folks here to help. Be sure to review our Pool Care Basics page and let us know if you have any questions. Enjoy the forum. 
www.troublefreepool.com
It's good you started a new thread (below) about your renovation process so all the comments can stay together. Lots of folks here to help. Be sure to review our Pool Care Basics page and let us know if you have any questions. Enjoy the forum. Eco Finish
Hi all, we live in CT and have an old (20-25 years) in-ground, gunite pool that needs repair. Lots of loose tiles, quite a few stains on bottom of pool (some spots where you can see the underlying gunite). So we are looking to do a full renovation. It is about 30,000 gallon pool with attached...
www.troublefreepool.com