About 5 months ago I removed and cleaned with vinegar the electrodes on my Intex SWG for my Intex 18x9 pool. Now the majority of bubbles is coming from the first electrode and little from the second or output electrode. Is this acceptable or did I do something wrong in the reinstallation. Thanks in advance for your responses. BTW I am located in Trinidad and Tobago. Lots of sunshine and rain.
Not as much chlorine is being generated
- Thread starter Wayne B
- Start date
- Jun 22, 2014
- 52,053
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
Hard to imagine simply removing the cell and cleaning with vinegar disrupted anything in the cell, but we can see if others may have an opinion on the matter. @Mdragger88 or @kellyfair ?
Can you tell us how old the SWG is?
Hard to imagine simply removing the cell and cleaning with vinegar disrupted anything in the cell, but we can see if others may have an opinion on the matter. @Mdragger88 or @kellyfair ?Can you tell us how old the SWG is?
- Jun 1, 2018
- 16,050
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
If you put them back where they came from it should be fine.
Is the swcg still keeping up?
Is the swcg still keeping up?
Can you post a photo of the SWCG? You said you cleaned it 5 months ago - did you notice the change right after you reinstalled, or just recently? And also mdragger’s question - is the chlorine production what you expect it to be?