- Feb 17, 2013
- 26
An old problem has come back again. No Flow with the Jandy Aquapure Handheld and the LCD panel one green light on and no error codes which I used to get in the past. The sensor is only about a year and a half old. The Chlorine cell is about 4 years old. I cleaned the cell (some build up but not bad at all just a light coating). Polished the sensor and still nothing. THe Chloirine level has been droppinng to next to nothing over the week before I noticed the no flow and cleaned the cell. The weather has been warmer about 84 water temp, and 88 ambient temp. not sure if that is a factor? Since the pool was built this system has been nothing but trouble!