New to TFP and have a Softub 220

[camper12]

Found lots of good information about this group. I am located in the mountains of Colorado. I have a Softub model T220 that I purchased new in 2020. I had it in storage for 3 months this fall. Filled it and started it up late November. It heated up without problems water temp started at 48 degrees to start and been running fine for several weeks. Then started the on/off cycling problem I was reading about when its up to temp. Since its under warranty I called Softub to ask some questions. Still waiting to hear back from them. Will let everyone know what I find out. Keep up the good work sharing information.
Thanks

 

[Mdragger88]

Welcome
Sorry you’re having issues with your tub
Sharing info is what we’re all about Hopefully you’ll have a resolution soon.
In the meantime, Check out Pool Care Basics
&

How do I use Chlorine in my Spa (or pool)?

If you have a question about any information within this Sticky, please start a new thread for yourself where you will receive very quick responses to your specific questions. Thank you! Introduction There are two main things to consider when maintaining your hot tub water, Water Balance and...

www.troublefreepool.com

Or

How do I use Bromine in my spa (or pool)?

Originally Posted by waterbear There is a lot of misinformation on the proper way to use Bromine so I hope this primer is helpful. First, you need to establish a bromide reserve in the water. Bromine tablets can do it by themselves but it can take literally weeks until enough dissolves. Some...

www.troublefreepool.com

Depending upon your sanitizer of choice.