I'm totally new to pools. We had a house built with a pool right before COVID. I have been trying to figure out most of the pool stuff on my own because quite frankly we were less than thrilled with the installation of our pool and the salesman afterwards.
1) How do I best calculate volume. I have used online calculators and got 20% differences in volume (16-20K gallon). I attached my schematic of my plan.
2) With a vinyl pool that is brand new. It was installed in October before we movied in and they just got it running post COVID. I have wrinkles in the floor of the pool in some places. Visually they are hard to see, but easy to feel. Is this to be expected or unacceptable? I also have dual drains in the deep and there is a circular depression I am estimating about 2inches deep where I assume a single drain was supposed to go. Is this normal or a problem?
1) How do I best calculate volume. I have used online calculators and got 20% differences in volume (16-20K gallon). I attached my schematic of my plan.
2) With a vinyl pool that is brand new. It was installed in October before we movied in and they just got it running post COVID. I have wrinkles in the floor of the pool in some places. Visually they are hard to see, but easy to feel. Is this to be expected or unacceptable? I also have dual drains in the deep and there is a circular depression I am estimating about 2inches deep where I assume a single drain was supposed to go. Is this normal or a problem?