New spa

[Lab Rat]

Moved from here.
Hi all, Thanks so much for all the valuable insight. After reading through this entire thread (and many others) I just want to re-iterate what I think I am understanding is correct. Assuming water is balanced. I should add enough Dichlor granules (what I have currently) for long enough to get the CYA at an acceptable level then switch to liquid pool chlorine from there on out until the next water change?

 

[Mdragger88]

That’s it switch to bleach when cya is around 30ppm.
That’s The dichlor then bleach method in a nut shell
Here’s the full guide

How do I use Chlorine in my Spa or Hot Tub?

If you have a question about any information within this Sticky, please start a new thread for yourself where you will receive very quick responses to your specific questions. Thank you! Introduction There are two main things to consider when maintaining your hot tub water, Water Balance and...

www.troublefreepool.com

It’s also conveniently pinned at the top of this sub forum
You may want to check cya occasionally & replenish it as it gets degraded by the heat over time. I tend to use a little dichlor for this reason every few weeks or so.