New Plaster Displaying Green 72hrs later

Mar 29, 2020
12
MO
We just finished a renovation and chose Pebblesheen Prism Blue. 72hrs after start up and the pool is still pulling green, not as green, but some. We are following plaster start instructions where chlorine (via floater) was just added a few hours ago. I don't recall it taking so long my first plaster. Our spa is a beautiful color where I understand the water overall is circulating faster, however at similar depth the pool still pulls more green vs the spa. Metals are tested and good. Brushing taking place 2x's / day.

Can anyone simply provide me relief that with chemical balance and brushing it'll get there?

Anyone with Prism Blue pics to share?
 
Have pictures? Plaster/pebble changes colors as it cures. Generally, blue plaster leads to greener water. We have Blue Surf pebble and it was more green than we wanted the first few weeks but as the blue pigment lessened the green tint to the water turned blue.
 
Here is a thread with a couple of Prism Blue pics:
 
Have pictures? Plaster/pebble changes colors as it cures. Generally, blue plaster leads to greener water. We have Blue Surf pebble and it was more green than we wanted the first few weeks but as the blue pigment lessened the green tint to the water turned blue.
thx for that note. pics attached + spa for comparison
 

Attachments

  • 1.jpg
    1.jpg
    635.6 KB · Views: 30
  • 2.jpg
    2.jpg
    686.8 KB · Views: 24
  • 3.jpg
    3.jpg
    664.8 KB · Views: 26
  • 4.jpg
    4.jpg
    696.9 KB · Views: 25
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.