I just beat the weather last week fighting rains and quickly got vermiculite in and liner set w about 4k gallons in pool. I have no plumbing hooked up til this weekend water is a week old 2moro. Still clear no color yet should I attempt to treat it at all or let it sit another week and deal w it when I can circulate. I was thinking I could sump pump it to spin or similar. Thanks for any ideas or advice. I have my tft teat kit btw thanx
New in ground diy have water no plumbing
- Thread starter jimmythegreek
- Start date
Definitely be dosing your water. An ounce of prevention is worth a pound of cure. If you have a sump pump that you can use to circulate that’s great, otherwise mix the water by brushing your pool
I only have it a few inches in deep end its about a 1/3 way full. I was gonna drain some water next week and finish fill from city tap water like I have in it now. What should I add to it for now. just dont wanna bleach out the liner or do harm til its all set I can sump pump the water around easily
Take the area that has water..... Length (feet) x Width (feet) x Depth (inches) / 12 = cubic feet of water
cubic feet of water x 7.5 = gallons of water.
Enter that into PoolMath and shoot for 5 PPM FC.
cubic feet of water x 7.5 = gallons of water.
Enter that into PoolMath and shoot for 5 PPM FC.