Things I see.
The Jandy check valve on the blower is going to rob you of air pressure. There are checks with lower spring tensions meant for this application. The lower spring tension means the blower won't use as much of it's available pressure to open the spring loaded flap.
The salt cell should have been lower to the ground.
A JVA actuated bypass for the heat pump, to prevent pushing too much water, should be installed for when higher pump speeds are used, such as in spa mode. A 2 HP E-Pump can push a lot of water.
Don't leave the pad area unsupported. You can see the base is already washing away.
Nice pool.
Scott
The Jandy check valve on the blower is going to rob you of air pressure. There are checks with lower spring tensions meant for this application. The lower spring tension means the blower won't use as much of it's available pressure to open the spring loaded flap.
The salt cell should have been lower to the ground.
A JVA actuated bypass for the heat pump, to prevent pushing too much water, should be installed for when higher pump speeds are used, such as in spa mode. A 2 HP E-Pump can push a lot of water.
Don't leave the pad area unsupported. You can see the base is already washing away.
Nice pool.
Scott