I'm struggling with something and need some honest opinions. The position of the spillway is not what I originally envisioned. It's going to be a 'scupper' type spillway. I originally expected it to be centered which would make it slightly offset when looking at it from the house/patio. However, they offset the spillway so that it's 'square' with the house/patio. I told him I wanted it centered and he convinced me it would look better from the house like this. I'm not sold though. So what are your honest opinions? I'm afraid the way its offset that it looks unbalanced/unsymmetrical. But the argument is that the waterfall will be nicer from this angle and we will be looking at an angled waterfall if we center the spillway.
I may ask the PB if he can cut the spillway in the center and do a gunite repair on the area that will need to be built back up.
View from the back porch
View from right side (tanning ledge/entry)
View from left side/deep side. This might be the best angle to show the offset. More lounging/patio area will be here
Pool Build here:
and-away-we-go-new-build-austin-tx-pics-t68574.html
Edited to add photos
I may ask the PB if he can cut the spillway in the center and do a gunite repair on the area that will need to be built back up.
View from the back porch

View from right side (tanning ledge/entry)

View from left side/deep side. This might be the best angle to show the offset. More lounging/patio area will be here

Pool Build here:
and-away-we-go-new-build-austin-tx-pics-t68574.html
Edited to add photos