Need help on building raised foundation for IntexUltra Frame

[nelson411]

Re: Need help on building raised foundation for IntexUltra F

Hi Kidfam,

I have a Intex Ultra Frame 16' x 52" pool. This solution may be a little late but here is anyways.
My ground sloped downward over 14" from one end to the other where I want to put the pool and I dig not want to dig out and level the ground (too hot in Alabama to do this by shovel).

That's a great solution! We are just trying to level the site, so it's not too late. Ours is not as unlevel as yours, but there is a minor slope that causes a tiny flood under our house when it rains.

Your deck and pool build look great!
thanks for sharing that!

Cheers,

Liz

 

[kidfam]

Re: Need help on building raised foundation for IntexUltra F

Here are some more pics.

What I want to do next is to install a through the wall skimmer where the current Intex outlet nozzle is and also make a fountain of comprising 2" PVC Pipe capped on the ends and a 2" PVC Tee in it's center. The fountain will then lay on the top edge of the pool and spray up and inward.