My unit has stopped climbing the walls but other than that is working well. The actual unit I have is he doheny dolphin but is just a private labeled S200. Are there any parts I can check or replace to help it go back up the walls? There are no settings on the control box other than the timer.
Maytronics s200 not climbing walls
- Thread starter Crimson850
- Start date
Going to assume the threads on the wheels are fine.
Any algae on the walls ?
Have you washed/cleaned the inside out.
There is an opening inside the filter compartment (at the top front) that lets water in, if it has debris in it, the cleaner will not run correctly.
I had the same problem, mine had leaves in it, after clearing it dolphin started climbing again.
Any algae on the walls ?
Have you washed/cleaned the inside out.
There is an opening inside the filter compartment (at the top front) that lets water in, if it has debris in it, the cleaner will not run correctly.
I had the same problem, mine had leaves in it, after clearing it dolphin started climbing again.
Last edited:
My Quantum is very similar and I had the same issue last year. I opened it up and found a couple of leaves wrapped around the impellor blades. Easy fix and it was like new after that.