Manual Cover Options for Semi Inground

[dnow]

We are planning to install a semi-inground rectangle pool, where one side will be level with a concrete patio and the other side will be exposed a foot above ground. However, we have a lot of large trees in our neighborhood, so we're looking for a manual cover for the pool when it's not in use. There are "on deck" rail systems, but that would require us to put a concrete apron around the whole pool to accommodate the rails.

Does anyone know of a manual cover that has rails that can be installed within or under the top of a semi-inground pool? They are available for full Inground pools with concrete coping but we haven't seen anything for semis. Thanks!

 

[bradgray]

I wish i could be more helpful than this; but I can confirm Pool Cover Specialists make automatic variations. They exist.

Not my photo.

 

[Newdude]

A solar (bubble) cover will collect all the falling debris. I swept mine off all the time with the pool brush. I'd push it to an edge and scoop it all off.

Or a leaf net will capture the bigger stuff.

Or build a TTTTTT rail holder with 4X6 posts for the outside edge.

 

[dnow]

@bradgray Thanks! I hadn't seen that from Pool Cover Specialists, I'll check into it.

@Newdude That's a good idea regarding building a separate rail holder. Maybe I can find some L-type brackets that come off the side supports of the pool, then mount along those.

Thank you both for the ideas!