Low CH with and high pH, trying to manage my CSI #

LAFelipe

Member
Jun 19, 2020
9
Los Angeles, California
Pool Size
16800
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite (T-9)
We just had a RO treatment at the beginning of winter and I am trying to keep my CH as low as possible because I know as soon as summer it's going to be going up on it's own. The way things sit right now my CSI numbers are between -.3 to 3 at a pH range of 7.8 to 8.4. Is it OK to have the pH higher than recommended as long as I manage the CSI value? My current values are as follows:

FC 3.5
pH 7.8
TA 80
CH 275
CYA 40 (just pumped out a ton of water because of rain and I'm waiting for my pH to go up before adding more stabilizer)
Salt 2800
Temp 60
CSI -.21
 
We've had so much rain lately that all my values have gone down. I just added liquid chlorine this morning to get it up.

Just to reiterate, I can ignore Pool Math's warning for pH outside range as long as CSI is OK? Thank you very much.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.