- Jun 21, 2023
- 42
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
After reading this site combined with rising CYA levels from Trichlor tablets , decided to move to liquid chlorine. Pool novice so very little knowledge.
I’m having an issue keeping FC and TC levels stable since moving to liquid about one week ago. Pool water is clear. Don’t know if it matters but also have a UV and ozone system.
Chemistry details below from Taylor testing this morning around 9 AM. Newly constructed Plaster pool, about 7 months ago.
pH - 7.8
Alk - 90
FC - 3 ppm
CH - 350 ppm
CYA - 70
Re-checked at around 2 pm
FC - 0
TC - 0
other variables same as above.
Exposed to lots of sunlight and pool temps consistently 86-90*
Any help would be appreciated.
I’m having an issue keeping FC and TC levels stable since moving to liquid about one week ago. Pool water is clear. Don’t know if it matters but also have a UV and ozone system.
Chemistry details below from Taylor testing this morning around 9 AM. Newly constructed Plaster pool, about 7 months ago.
pH - 7.8
Alk - 90
FC - 3 ppm
CH - 350 ppm
CYA - 70
Re-checked at around 2 pm
FC - 0
TC - 0
other variables same as above.
Exposed to lots of sunlight and pool temps consistently 86-90*
Any help would be appreciated.