I have an intex 12 ft pool with the inflatable ring. It has a leak but I can't find it. I fill the ring which has a small leak somewhere because after about a few days u can tell it has lost air but I also have to fill the pool again. It loses water to a certain level (about 24 inches) and then stops. It's good for about 2 days. Have looked for wet spots and find nothing. Any suggestions. I assume the leak has to be above or at the 24 inch mark?
Leak
- Thread starter bboran
- Start date
- Jun 22, 2014
- 52,167
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I would agree. The leak must be where the water level stops dropping. They can be very tricky to find. Some people will even try some food coloring/dye to see if it gets pulled-into a leaky area.