Hello everyone!
I am back once again!
My cloudy water issue is gone, and the pool is crystal clear! Thanks to everyone here who helped me get through that 3 week ordeal!
Now, I have another issue I must address.
We have air bubbles blowing out of both return lines. There is air in our pump basket and the MPV is making a horrible gurgling type of noise.
My husband bought some PVC cement at Lowe's and went over all of the spaces/cracks with it to seal everything up. He also used silicon spray and sprayed the o-ring inside the pump basket lid and ensured it was in good shape. We also teflon taped the drain plug in the skimmer basket and made sure it was on tight.
Therefore, we are out of options, and are not sure what to do next.
Any help or advice you can give would be great.
I am going to include a short video that will show my equipment pad/air bubbles/etc.
I have a StarRite sand filter, 2 return lines, 1 skimmer (2 holes inside/1 hole IS plugged), the propeller is 1 horse power, and the motor is 1.25 horsepower.
We are not sure what the RED BALL VALVE is, and that could be our problem.
Here is the video:
[youtube:1t2ynwld]N6gEbOtPdX8[/youtube:1t2ynwld]
I am back once again!
My cloudy water issue is gone, and the pool is crystal clear! Thanks to everyone here who helped me get through that 3 week ordeal!
Now, I have another issue I must address.
We have air bubbles blowing out of both return lines. There is air in our pump basket and the MPV is making a horrible gurgling type of noise.
My husband bought some PVC cement at Lowe's and went over all of the spaces/cracks with it to seal everything up. He also used silicon spray and sprayed the o-ring inside the pump basket lid and ensured it was in good shape. We also teflon taped the drain plug in the skimmer basket and made sure it was on tight.
Therefore, we are out of options, and are not sure what to do next.
Any help or advice you can give would be great.
I am going to include a short video that will show my equipment pad/air bubbles/etc.
I have a StarRite sand filter, 2 return lines, 1 skimmer (2 holes inside/1 hole IS plugged), the propeller is 1 horse power, and the motor is 1.25 horsepower.
We are not sure what the RED BALL VALVE is, and that could be our problem.
Here is the video:
[youtube:1t2ynwld]N6gEbOtPdX8[/youtube:1t2ynwld]