How do I run the filter and clean without making more chlorine? I have an eco 15210-1 sand filter and 1500gph pump set up.
Intex swg question
- Thread starter Vinnyd0810
- Start date
- Jun 22, 2014
- 52,034
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I recall this question not too long ago. For some reason I'm thinking the Intex SWGs (or perhaps just some models) do not have a seperate on-of function for the SWG versus the pump. They are either both on or both off. Hopefully another Intex owner will confirm.
If it is a combined unit you can put thr unit into"FP" mode by pushing and holding the timer and lock buttons simultaneously, the display will show FP until you reset it the same way.
If I'm reading this correctly, you wish to run the pump but don't want to run the SWG? If so, you can unplug the electrode from the unit to disable it.
Similar threads
