Intex Automatic Pool Cleaner- stopped help

JeaniB

Gold Supporter
May 30, 2019
317
Midwest
Pool Size
14680
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
CircuPool RJ-45 Plus
My Intex Automatic Pool Cleaner worked great,.. twice. I’ve googled and watched some video tips,.. still not moving!
It appears that the little slider doesn’t move far enough to the right and the lever is not pushed far enough to close. Any ideas?
 

Attachments

  • E520BFA4-FA2F-4302-B8F3-3C4D8C264383.jpeg
    E520BFA4-FA2F-4302-B8F3-3C4D8C264383.jpeg
    367.1 KB · Views: 11
My first unit worked for two months, then one day it would only go one direction. I took apart the gears and used spray lubricant to get it to move easily. Never fixed the issue. I called Intex to set up a warranty replacement. Filled out the online paperwork and sent in a pdf of the receipt. I had the part in a week. I would recommend contacting intex for replacement.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.