My solar won’t automatically turn on with Intellicenter2, I’ve been having to manually turn it on every time to get solar to turn on. And when I do turn it on, it constantly has a set solar temp of 78 degrees which I constantly have to change to my preferred temp of 82. How do I get solar to automatically turn on. I do have an actuator installed and solar in on plugged into Valve A. Also would be nice to be able to set a schedule also. Thanks!
IntelliCenter Solar setup Issue.
- Thread starter LJPool
- Start date
- May 3, 2007
- 18,087
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Ahultin
Bronze Supporter
- Aug 19, 2021
- 1,601
- Pool Size
- 17700
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
- May 3, 2007
- 18,087
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Sorry, this was not very descriptive so I have to ask because we have had some members put the sensors in the wrong locations. So the solar sensor is in the sun near the panels and NOT in a pipe exposed to water, correct?
Is the water sensor reading the correct water temperature?
Yes that’s it! I knew it had to be something simple that I kept overlooking. Thanks!