Intellicenter relay plugs

[rozza12]

I am trying to integrate some third party devices with intellicenter using is4 as an input.
The toggle on/off keeps getting out of synch so I would like to provide feedback to the other device.
I have some spare header attachments for relays so would like to use one of these to provide feedback.

I don’t have a spare relay so am trying to find a plug comparable with the relay header.

Does anyone know where to start looking?

Thanks
Rosa

 

[ajw22]

Relay connectors are 2.5mm-pitch 2-pin female JST XH-style connector.

Pololu - 2-Pin Female JST XH-Style Cable (15cm)

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which means this connector will work with 0.1" male header pins and standard perfboards and solderless breadboards. The other ends of the wires are...

www.pololu.com