Increase timeline precision for low numbers

[Nackle]

I use PoolMath to help maintain my 455 gallon hot tub. Typically the amount of chemicals I need to add to my hot tub is fairly low—maybe 0.4 ounces of a dry acid, for example. When I look at that entry in the timeline, it rounds to just 0 ounces.

Can the precision be adjusted to show tenths when the number is less than (say) 10?

 

[Leebo]

I've made a note to revisit this as it's an issue that keeps slipping past us during updates.

 

[Newdude]

Found an accidental work around.

I was going to suggest you math it to grams so i went to manual logging from the + sign, assuming 7 grams wouldn't round up, and it didn't. And 0.24 ounces didn't either.

Its an extra step instead of logging the addition automatically from the CYA page (etc), but it works.




*********************************
Edit some hours later

Workaround #2 :

Go into the upper right settings menu and set your hot tub to 1722 liters. Then it will advise you in grams and auto save them. If you're using a digital scale already, it has both. Or they are $20. Or google the conversion.

 

[Nackle]

Nice! Grams are my preferred unit. It never occurred to me that switching my hot tub’s measurement to metric would convince the app to give me metric units. Thanks!