iAqualink for air b and b

[moore887]

Hi,

I take care of a pool and hot tub combo for an short term rental. The problem we're having is that the guests (using the handheld remote) are leaving the pool in spa mode and increasing the pool and spa temperature on the heatpump which is controlled by the iaqualink.

Is there anyway to egg timer spa use and set limits for the heater in each mode?

Thanks

 

[PoolGate]

Not really. If you have iAqualink, you should be able to access the controls remotely and shut everything down or change temp.

You can also set an "All Off" time. You could say shut everything off at 2am. Then schedule stuff to turn back on via the scheduler. You can't schedule a specific temp though.