Do I loosen the hose clamp and try to wiggle it off the inlet/outlet; or do I unscrew the inlet/outlet hoses? If the latter, it twists the hoses and seems to cause kinking. If the former, it’s really tight and seems to be putting a lot of stress on the pool where it attaches to the inlet/outlet.
What do you do?
I have my plugs in; I have the filter backwashed and drained; heat pump drained. Cover is on. Temps are cold, chlorine is high. Everything is done except taking these dumb hoses off so they don’t burst.
What do you do?
I have my plugs in; I have the filter backwashed and drained; heat pump drained. Cover is on. Temps are cold, chlorine is high. Everything is done except taking these dumb hoses off so they don’t burst.