i have the intex 1000 gph filter pump that im using on my pool that has a capacity est. 1200 gal it worked great for about three weeks now when i plug in the pump there is a red light flashing on the receptacle and a steady green light it now run for about ten min to about 20 min.. dont know whether i have a receptacle , cord or motor problem.. it is still under warranty but sure would like to know if there could be an easy fix.. thanks
Howd !!!
- Thread starter runningman77777
- Start date
Howdy, Runningman 
Welcome to Trouble Free Pools.
Have you checked for any kinks in the line, or possibly clogged line? That would interrupt water movement.
Check the manual to figure out what the flashing red light signifies. Often you'll find a Troubleshooting section in the back of the manual.
Maddie
Welcome to Trouble Free Pools.Have you checked for any kinks in the line, or possibly clogged line? That would interrupt water movement.
Check the manual to figure out what the flashing red light signifies. Often you'll find a Troubleshooting section in the back of the manual.
Maddie