JB: Yes, I didn't adjust PH during slam, I added the PH Down when the FC was down to 4. Odd that the TA didn't go down?
Techguy: Was your penny profile pic taken from above 50+ inches of water?
Sax: I am worried about burning out this motor too, as it says in the instructions to never run it more than 12 hours straight!
Did you have to pay shipping to send your burnt one back? I suppose I could alternate between the sand, and the old 1000gph pump with the Unicel cartridge... but what a pain.
You guys think maybe I should let it cool off an hour or so every 12 hours?
Smykowski: It seems you were right on the money. My overnight was barely noticeable before, but the algae must have went and got its buddies. Cuz now the OCLT drops FC from 20 to 18. And my CC's that used to be 0 or 0.5 are now a solid 1.
Indeed, I took a step backwards. DOH!
Techguy: Was your penny profile pic taken from above 50+ inches of water?
Sax: I am worried about burning out this motor too, as it says in the instructions to never run it more than 12 hours straight!
Did you have to pay shipping to send your burnt one back? I suppose I could alternate between the sand, and the old 1000gph pump with the Unicel cartridge... but what a pain.
You guys think maybe I should let it cool off an hour or so every 12 hours?
Smykowski: It seems you were right on the money. My overnight was barely noticeable before, but the algae must have went and got its buddies. Cuz now the OCLT drops FC from 20 to 18. And my CC's that used to be 0 or 0.5 are now a solid 1.
Indeed, I took a step backwards. DOH!