I tested this morning, and had Leslies test the salt.
FC = 5.5
CC = 0
PH = 7.4
TA = 100
CH = 350
CYA = 65
Salt = 3300
Borate = 50
When I use the pool math calculator I get a SI of -.39. In my Circupool SI30+ specs on the power box label are -0.2 / + 0.2 (a bit tight, I'd say. The manual says -.3 / +.3, but what the hey.)
I can zero in by increasing TA, but that goes against the recommended TA of 60 - 80. NOTE: I got 50 TA using the 10ml sample, and 100 using the 44 ml sample. I'm very careful with my tests.
Suggestions?
Thanks in advance...
FC = 5.5
CC = 0
PH = 7.4
TA = 100
CH = 350
CYA = 65
Salt = 3300
Borate = 50
When I use the pool math calculator I get a SI of -.39. In my Circupool SI30+ specs on the power box label are -0.2 / + 0.2 (a bit tight, I'd say. The manual says -.3 / +.3, but what the hey.)
I can zero in by increasing TA, but that goes against the recommended TA of 60 - 80. NOTE: I got 50 TA using the 10ml sample, and 100 using the 44 ml sample. I'm very careful with my tests.
Suggestions?
Thanks in advance...