High cartridge filter pressure

CTFocusST

Well-known member
Jul 4, 2019
228
Glastonbury CT
Pool Size
13500
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
CircuPool RJ-45 Plus
Pool started green and I'm working through the SLAM. Water is clear but I haven't passed oclt yet.

One thing I'm noticing is that even after soaking cartridge filter in dishwasher detergent pressure still is up around 23psi same as before soaking. Last few years clean pressure was somewhere around 10. It's plugging up enough that skimming doesn't really work and occasionally get bubble in pump, not enough to run dry but circulation is definitely down

Did the soak not clean it far enough or is there something else?
 
I have two filters and I am seeing some improvement after soaking in dishwasher detergent each day.

Would it be a bad idea to put enough bleach in with the dishwasher detergent to bring bucket to slam level?
 
Last edited:
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.