Just added salt back into my 1 year old quartz finish pool. Just wondering best way to slow the ph drift down a bit. I know my alkalinity is still a bit high but I know the addition of the acid will bring it down over time.
FC 3.6
PH 7.5
TA 100
CH 300
CYA 80
tested with my Taylor 2006 and typically I'll stop into the pool store once in a while to verify that I'm close even though the three different stores are frequent are not very accurate. Pool store gave me 7.9 today when I'm sure I was at 7.5 to 7.6. I'm hoping to drop the percentage down on the generator due to the fact that the Cya was just brought up this week.
FC 3.6
PH 7.5
TA 100
CH 300
CYA 80
tested with my Taylor 2006 and typically I'll stop into the pool store once in a while to verify that I'm close even though the three different stores are frequent are not very accurate. Pool store gave me 7.9 today when I'm sure I was at 7.5 to 7.6. I'm hoping to drop the percentage down on the generator due to the fact that the Cya was just brought up this week.
