Our pool builder went bankrupt before crossing the finish line with our pool. I'm piecing the rest together. We have Hayward Jet Air III SP1434PAKB jets in baggies. I need to install them and am wondering what I need between the hole in the spa and the jet. I found the Owner's Manual for these jets but want to make sure that the "seat" is all I need. And any instructions on installing the components would be appreciated. We've paid in full for the pool installation and were at about 85-90% complete so we have become DIY pool builders.
Help With Hayward Jet Installation
- Thread starter shanalynne
- Start date
- May 3, 2007
- 16,964
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Yes, the nozzle is missing. Can you post a picture of the parts in the bag? Just want to make sure they are what I think they are.
Normally those are installed flush with the spa wall but those are pretty deep so it may be challenging to install.
Normally those are installed flush with the spa wall but those are pretty deep so it may be challenging to install.
Last edited: