Hello to all,
Have a Hayward SP-3400-VSP and it did not come on this morning per normal program. [8-4 daily]. Installed Feb 2015 by PB.
The remote display showed that both the pool icon and pump/filter icon were on, but it also said "check system or system error".
I went out to the panel and checked to see if the pump breaker was on and it was. I turned off the pump/filter at panel. I flipped the pump breaker off, then back on, then turned on the pump/filter at the panel. The pump made about a 1 second "grunt-grind sound" and that's it. Turned off and tried it again and the same thing. I then just turned off the pump/filter.
There is nothing of size in the pump strainer basket and both skimmer baskets were almost empty.
I called my PB and they referred me to a Hayward Rep...they are coming out tomorrow sometime. Any ideas or suggestions on the problem and/or what I can do?
Lastly, I have the Hayward Super II [1.5HP] Pump for my 2 scuppers. Could I run this for a bit to keep pool water circulating? I have not added my liq CL yet, so is it ok to do so w this pump?
Thank you for your advice,
tstex
Have a Hayward SP-3400-VSP and it did not come on this morning per normal program. [8-4 daily]. Installed Feb 2015 by PB.
The remote display showed that both the pool icon and pump/filter icon were on, but it also said "check system or system error".
I went out to the panel and checked to see if the pump breaker was on and it was. I turned off the pump/filter at panel. I flipped the pump breaker off, then back on, then turned on the pump/filter at the panel. The pump made about a 1 second "grunt-grind sound" and that's it. Turned off and tried it again and the same thing. I then just turned off the pump/filter.
There is nothing of size in the pump strainer basket and both skimmer baskets were almost empty.
I called my PB and they referred me to a Hayward Rep...they are coming out tomorrow sometime. Any ideas or suggestions on the problem and/or what I can do?
Lastly, I have the Hayward Super II [1.5HP] Pump for my 2 scuppers. Could I run this for a bit to keep pool water circulating? I have not added my liq CL yet, so is it ok to do so w this pump?
Thank you for your advice,
tstex