My Hayward Swimpure Extreme will not hold the proper diagnostic settings, it seems like I’ve tried everything, what can be the problem?
Hayward Swimpure Extreme troubleshooting
- Thread starter mtajohn
- Start date
- Jul 21, 2013
- 65,170
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
This is the basic information we need to know in diagnosing a problem:
You have either a bad board or worn out cell.
How old is your cell?
www.troublefreepool.com
This is the basic information we need to know in diagnosing a problem:
- Report all diagnostic readings when you..
- Move the switch from auto to off and check all of the readings.
- Move the switch back to auto and recheck the readings.
- Move the switch to off for a minute and then back to auto and recheck the readings.
- What are the first seven characters of the cell and box serial numbers?
- What is the actual salinity and how are you measuring it?
You have either a bad board or worn out cell.
How old is your cell?
Hayward Aquarite SWG - Further Reading
www.troublefreepool.com