Hayward cell main wire frayed help
- Thread starter dpoolman
- Start date
-
- Tags
- hayward t9
Holding the plug vertically with the cord going down and looking at the connection points.
1 is top left, 2 is top right, 3 is second down left and so on with 9 being lower left and 10 being lower right.
1) Black - Power to cell
2) White - Power to cell
3) Black - Power to cell
4) White - Power to cell
5) Brown - Not used
6) Red - Goes to thermistor
7) Orange - Not used on older models, used for cell ID chip on new models.
8) Yellow - Not used on older models, used for cell ID chip on new models.
9) Green - Not used
10) Blue - Goes to thermistor.
1 is top left, 2 is top right, 3 is second down left and so on with 9 being lower left and 10 being lower right.
1) Black - Power to cell
2) White - Power to cell
3) Black - Power to cell
4) White - Power to cell
5) Brown - Not used
6) Red - Goes to thermistor
7) Orange - Not used on older models, used for cell ID chip on new models.
8) Yellow - Not used on older models, used for cell ID chip on new models.
9) Green - Not used
10) Blue - Goes to thermistor.
Well I may have dodged a bullet then with green being the frayed one. The cell panel at the wall it’s reading volts and amps well on SC so hopefully it’s working. Which based on the reading it is
